Find the scholarship that's the right fit for you
Bachelor of Engineering (Honours) (ETB001.1)
Please note these are the 2021 details for this course
| Selection rank | Delivery mode | Location | Duration |
|---|---|---|---|
| 60 | Blended |
Bruce, Canberra |
4.0 years |
| Faculty | Discipline(s) | Available teaching periods | UAC code |
| Faculty of Science and Technology | Academic Program Area - Technology |
365016 | |
| Fees | English language requirements | ||
|
|
View requirements | ||
English language requirements
An IELTS Academic score of 6.5 overall, with no band score below 6.0 (or equivalent).
Delivery mode
Blended: Mixture of online and on campus units are available.
On campus: Units are delivered on campus.
Online: All units are online.
Online Plus: Units are available online, except where attendance at a physical location is required for placement or professional accreditation.
Location
All course material is developed and delivered via the location listed. Online units do not require on campus attendance.
Selection rank
The selection rank is the minimum ATAR plus adjustment factors required for admission to the program in the previous year. This is an indicative guide only as ranks change each year depending on demand.
Fees disclaimer
Annual fee rates
The fees shown are the annual fee rates for the course. The annual rate is the fee that applies to standard full-time enrolment, which is 24 credit points. The final fee charged is based on the proportion of 24 credit points in which a student enrols. Students enrolled in a Commonwealth Support Place (CSP) are required to make a contribution towards the cost of their education, which is set by the Commonwealth Government. Information on Commonwealth Supported Places, HECS-HELP and how fees are calculated can be found here.
Please note: Course fees are assessed annually and are subject to change.
| Academic entry requirements | Delivery mode | Location | Duration |
|---|---|---|---|
| Blended |
Bruce, Canberra |
4.0 years | |
| Faculty | Discipline(s) | Available teaching periods | CRICOS code |
| Faculty of Science and Technology | Academic Program Area - Technology |
099434M | |
| Fees | English language requirements | ||
|
|
View requirements | ||
Fees disclaimer
Annual fee rates
The fees shown are the annual fee rates for the course. The annual rate is the fee that applies to standard full-time enrolment, which is 24 credit points. The final fee charged is based on the proportion of 24 credit points in which a student enrols. Information on how fees are calculated can be found here.
Please note: Course fees are assessed annually and are subject to change.
Delivery mode
Blended: Mixture of online and on campus units are available.
On campus: Units are delivered on campus.
Online: All units are online.
Online Plus: Units are available online, except where attendance at a physical location is required for placement or professional accreditation.
English language requirements
An IELTS Academic score of 6.5 overall, with no band score below 6.0 (or equivalent).
Location
All course material is developed and delivered via the location listed. Online units do not require on campus attendance.
Academic entry requirements
To study at UC, you’ll need to meet our academic entry requirements and any admission requirements specific to your course. Please read your course admission requirements below. To find out whether you meet UC’s academic entry requirements, visit our academic entry requirements page.
Engineer the future you’ve always dreamed of
Gain the knowledge, skills and experience to design and build the robotic, AI or Networking future you’ve always dreamed of creating with the highly respected UC Bachelor of Engineering (Honours).
Held over four years this course is has been created to help those students interested in exploring a career in either Robotics and Artificial Intelligence and/or Network and Software Engineering by creating a platform from which to choose your specialisation.
- Robotics & Artificial Intelligence - this specialisation offers conceptual grounding in intelligent systems with the opportunity to apply theoretical knowledge in a practical setting through direct access to humanoid robots, robotic arms, wheeled platforms and other hi-tech robotic equipment.
- Network and Software Engineering - in this course you will gain in-depth knowledge and skills in the design, development and operation of software-based networked systems, including mobile and wireless data communications networks, network security applications and services relating to cloud computing, big data and multimedia networks.
Study a Bachelor of Engineering (Honours) at UC and you will:
- gain highly desirable knowledge and skills in a future proof industry
- work with the latest computer aided software.
- learn how to design systems from the ground up
- become proficient in engineering research, design and management
- contribute your own ideas during site visits field work
- participate in numerous Work Integrated Learning (WIL) opportunities
- learn professional ideologies such as professional ethics, expectations and teamwork
- choose to specialise in either Robotics and Artificial Intelligence or Network and Software Engineering.
- be able to participate in the Engineers without Borders Challenge
- gain unrivalled access to industry and government stakeholders
- build extensive professional networks
- earn a globally recognised qualification
- be in-demand
Work Integrated Learning (WIL)
WIL is an integral component of the Bachelor of Engineering (Honours) course as it offers students the opportunity to gain valuable hands-on experience and build professional relationships through real work, or work-like placements.
As part of this course students will be invited to also participate in the Engineers without Borders Challenge which is a humanitarian-focused activity offered in all UC engineering honours degrees.
To ensure our students have access to the right people and places, UC works hard to foster close industry connections and regularly engages with industry partners who possess both the skills and experience to provide specialised knowledge and training opportunities.
All course content is reviewed annually by our Course Advisory Group which is made up of a panel of highly qualified and respected industry experts.
Career opportunities
Whether you’re pursuing a career in robotics and AI, or wish to specialise in Network and Software Engineering, The UC Bachelor of Engineering (Honours) offers a natural progression into any one of the following careers:
- cyber security engineer
- network architect
- chief technology officer
- artificial intelligence engineer
- robotics engineer
- data scientist
- business intelligence analyst
- data analyst
- software engineer
- network engineer
- ICT manager
Professional accreditation
This course will pursue accreditation with Engineers Australia at Professional Engineer level and also with the Australian Computer Society at Professional level.
Admission to this course is based on an entrance rank. A rank can be achieved by the following means:
- Year 12 ATAR
- other Australian Qualification
- work experience
- overseas qualification
We also offer a number of entry initiatives that give you the opportunity to gain entry to the University via alternate pathway programs and admissions schemes.
More information is available on our Alternative Entry page: http://www.canberra.edu.au/future-students/applications/apply-now/alternative-entry
Assumed knowledge
Basic knowledge and skills in ICT (Information and Communication Technology); Basic numeracy and literacy skills.
Periods course is open for new admissions
This course is not open for new admissions.
Credit arrangements
There are currently no formal credit transfer arrangements for entry to this course. Any previous study or work experience will only be considered as part of the application process in accordance with current course rules and university policy.
Bachelor of Engineering (Honours) (ETB001) | 96 credit points
- Students who wish to have work experience formally recorded and assessed can choose to enrol in 10006 Engineering Work Experience (0cp).
- The course award is determined by the selected specialist major. E.g. Completing the Robotics & AI major leads to the Bachelor of Engineering (Honours) in Robotics & AI award name.
Open Electives - 12 credit points as follows
- - Must pass 12 credit points from anywhere in the University.
In addition to course requirements, in order to successfully complete your course you must meet the inherent requirements. Please refer to the inherent requirements statement applicable to your course
UC - Canberra, Bruce
Year 1
Semester 1
Year 2
Year 3
Semester 1
Internet of Things (11511) OR High Speed Networks (9783)
Year 4
Semester 1
Year 1
Semester 1
Year 2
Year 3
Semester 1
Semester 2
Internet of Things (11511) OR High Speed Networks (9783)
Year 4
Semester 1
Year 1
Year 2
Year 3
Semester 1
Semester 2
Two Open Electives
Year 4
Semester 1
Internet of Things (11511) OR High Speed Networks (9783)
Semester 2
Open Elective
Year 5
Year 1
Semester 1
Year 2
Semester 1
Open Elective
Year 3
Year 1
Semester 1
Year 2
Year 3
Year 1
Year 2
Year 3
Semester 1
Year 4
Year 5
Semester 1
Open Elective
Course duration
Standard 4 years full time, or part time equivalent. Maximum - 10 years.
Learning outcomes
| Learning outcomes | Related graduate attributes |
|---|---|
| Identify, interpret and critically appraise current developments and advanced technologies and apply knowledge of these to network and software engineering area. | UC graduates are professional: Employ up-to-date and relevant knowledge and skills; communicate effectively; use creativity, critical thinking, analysis and research skills to solve theoretical and real¿world problems; and display initiative and drive, and use their organisational skills to plan and manage their workload. UC graduates are global citizens: Think globally about issues in their profession; adopt an informed and balanced approach across professional and international boundaries; make creative use of technology in their learning and professional lives; and behave ethically and sustainably in their professional and personal lives. UC graduates are lifelong learners: Reflect on their own practice, updating and adapting their knowledge and skills for continual professional and academic development; adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas; and evaluate and adopt new technology. |
| Demonstrate an understanding of contemporary engineering, including the role of standards and the need for the continuing professional development of engineers, and identify, formulate, solve and manage innovative methods in the context of solving a complex problem involving the development of new knowledge. | UC graduates are professional: Employ up-to-date and relevant knowledge and skills; communicate effectively; use creativity, critical thinking, analysis and research skills to solve theoretical and real-world problems; display initiative and drive, and use their organisational skills to plan and manage their workload; and take pride in their professional and personal integrity. UC graduates are global citizens: Think globally about issues in their profession; adopt an informed and balanced approach across professional and international boundaries; understand issues in their profession from the perspective of other cultures; communicate effectively in diverse cultural and social settings; make creative use of technology in their learning and professional lives; and behave ethically and sustainably in their professional and personal lives. UC graduates are lifelong learners: reflect on their own practice, updating and adapting their knowledge and skills for continual professional and academic development; be self-aware; adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas; and evaluate and adopt new technology. |
| Research, identify, conceptualise, investigate, and interpret knowledge from modern network and software engineering tools and techniques to synthesise a coherent approach to the solution of a problem and/or the design of a project. | UC graduates are professional: Employ up-to-date and relevant knowledge and skills; work collaboratively as part of a team, negotiate, and resolve conflict; and display initiative and drive, and use their organisational skills to plan and manage their workload. UC graduates are global citizens: Think globally about issues in their profession; adopt an informed and balanced approach across professional and international boundaries; and make creative use of technology in their learning and professional lives. UC graduates are lifelong learners: Reflect on their own practice, updating and adapting their knowledge and skills for continual professional and academic development; adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas; and evaluate and adopt new technology. |
| Understand and proficiently apply the relevant sciences and scientific methods in network and software engineering practice area, to design solutions to complex problems. | UC graduates are professional: Work collaboratively as part of a team, negotiate, and resolve conflict; and take pride in their professional and personal integrity. |
| Demonstrate advanced knowledge of contextual factors, research direction, and underpinning information impacting the engineering discipline, including risk identification and management, and design and implement design metrics and alternatives, systems measurement, simulation, modelling and analysis, and environmental constraints and safety issues. | UC graduates are professional: Employ up-to-date and relevant knowledge and skills; communicate effectively; work collaboratively as part of a team, negotiate, and resolve conflict; display initiative and drive, and use their organisational skills to plan and manage their workload; and take pride in their professional and personal integrity. UC graduates are global citizens: Think globally about issues in their profession; understand issues in their profession from the perspective of other cultures; communicate effectively in diverse cultural and social settings; make creative use of technology in their learning and professional lives; and behave ethically and sustainably in their professional and personal lives. UC graduates are lifelong learners: Be self-aware; and adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas. |
Majors
- Specialist Major in Network and Software Engineering (SM0061)
- Specialist Major in Robotics and AI (Engineering) (SM0062)
- Core Major in Engineering (CM0009)
Awards
| Award | Official abbreviation |
|---|---|
| Bachelor of Engineering (Honours) in Robotics and Artificial Intelligence | BE (Hons) Robotics&AI |
| Bachelor of Engineering (Honours) in Network and Software Engineering | BE (Hons) Network&SE |
Honours
The Bachelor of Engineering in Network and Software Engineering (Honours) is an Honours degree. The Honours merit calculation will be based on the Honours Grade Point Average (Honours GPA) defined as the GPA in the required UG Level 3 and Level 4 units of the course and other conditions:
- First Class: Honours GPA >6, and High Distinction in Engineering Project (Part A) and Engineering Project (Part B);
- Second Class Division I: Honours GPA >5.25, and Distinction in Engineering Project (Part A) and Engineering Project (Part B);
- Second Class Division II: Honours GPA >4.5, and Credit in Engineering Project (Part A) and Engineering Project (Part B).
- The rest of students who pass the course take out honours without a class.
Enquiries
| Student category | Contact details |
|---|---|
| Prospective Domestic Students | Email study@canberra.edu.au or Phone 1800 UNI CAN (1800 864 226) |
| Current and Commencing Students | In person, Student Centre Building 1 or Email Student.Centre@canberra.edu.au |
| Prospective International Students | Email international@canberra.edu.au or Phone +61 2 6201 5342 |
It seems something went wrong with your submission. Please email study@canberra.edu.au to receive your 2023 course guide.
stayonpage
Thanks for submitting your details. A course guide will be sent your email address shortly.
