Teaching Secondary Technologies PG (11371.2)

Please note these are the 2028 details for this unit
Home
/
Find your course
/
Teaching Secondary Technologies PG
Available teaching periods Delivery mode Location
View teaching periods Placement
 Bruce, Canberra
EFTSL Credit points Faculty
0.25 6 Faculty Of Education
Discipline Study level HECS Bands
School Of Teacher Education Post Graduate Level Band 1 2021 (Commenced After 1 Jan 2021)
Band 1 2021 (Commenced Before 1 Jan 2021)
This unit develops pre-service teachers' pedagogical content knowledge of the Technologies discipline. It recognises the significance of 'teacher identity' to professional practice and encourages pre-service teachers to establish an 'Technologies teacher' identity consistent with discipline-specific theory and practice and more general educational theories and practices. This unit also develops pre-service teachers' knowledge of the Australian Curriculum for Technologies and develops their discipline-specific teaching strategies. Pre-service teachers learn how to plan units of study and individual lessons for the Technologies classroom, taking into account a diverse range of student needs, curriculum integration strategies, professional reflective practices, the creative and innovative use of ICT, as well as assessment, feedback and reporting strategies. Pre-service teachers will engage in a series of school-based clinical teaching workshops contributing a cumulative total of 3 days' professional experience as well as a 'block' placement for 15 days in a Secondary School, during which time they will demonstrate the ability to plan and teach for a sustained period of time and consolidate the skills addressed within the academic component of this unit.

Important Note: Students should only enrol in this unit if it matches their designated discipline area at point of admission to the course. If in doubt, contact the Program Director or the Academic Programs Team at the Faculty of Education before enrolling.

Students should be aware that completing a disciplinary 'method' unit for which they do not meet NESA's Subject Content Knowledge Requirements may lead to problems when seeking to register as a teacher.

Learning outcomes

On successful completion of this unit students will be able to:
1. Demonstrate an understanding of student development, how this affects student learning and implications for inclusive curriculum and teaching;
2. Display knowledge and understanding of the Australian Curriculum's cross-curriculum priorities and general capabilities;
3. Demonstrate a broad knowledge and understanding of the structure of the Australian Curriculum for Technologies at secondary and senior secondary levels and its significance to teaching and learning in the Technologies classroom;
4. Demonstrate knowledge and understanding of the concepts, substance and structure of the content and teaching strategies needed in the secondary Technology classroom;
5. Adopt a reflective approach to teaching and the related ability to plan for and implement to teaching, learning and assessment strategies that inform and have a positive impact on Technology learners in the contemporary secondary classroom;
6. Display knowledge and understanding of literacy, numeracy and ICT teaching strategies and resources, and how these can be used to expand curriculum learning opportunities for all students;
7. Identify and implement strategies to support inclusive student participation and engagement in classroom activities;
8. Demonstrate an understanding and ability to implement assessment strategies, including informal and formal, diagnostic, formative and summative approaches to assess and report student learning;
9. Demonstrate the capacity to organise and manage classroom activities and behaviour, to provide clear directions, and to maintain a supportive and safe learning environment; and
10. Engage with professional colleagues, and professional learning, to maintain a productive working environment and to improve professional practice.


Graduate attributes

1. UC graduates are professional - communicate effectively
1. UC graduates are professional - display initiative and drive, and use their organisation skills to plan and manage their workload
1. UC graduates are professional - employ up-to-date and relevant knowledge and skills
1. UC graduates are professional - take pride in their professional and personal integrity
1. UC graduates are professional - use creativity, critical thinking, analysis and research skills to solve theoretical and real-world problems
1. UC graduates are professional - work collaboratively as part of a team, negotiate, and resolve conflict
2. UC graduates are global citizens - adopt an informed and balanced approach across professional and international boundaries
2. UC graduates are global citizens - communicate effectively in diverse cultural and social settings
2. UC graduates are global citizens - understand issues in their profession from the perspective of other cultures
3. UC graduates are lifelong learners - adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas
3. UC graduates are lifelong learners - be self-aware
3. UC graduates are lifelong learners - reflect on their own practice, updating and adapting their knowledge and skills for continual professional and academic development
4. UC graduates are able to demonstrate Aboriginal and Torres Strait Islander ways of knowing, being and doing - communicate and engage with Indigenous Australians in ethical and culturally respectful ways


Prerequisites

11354 Using Data to Improve Learning AND 11351 Curriculum and Assessment in Secondary Education

Corequisites

This unit is only available to students in the Master of Secondary Teaching.

Incompatible units

None.

Equivalent units

None.

Assumed knowledge

None.
Availability for enrolment in 2027, 2028 is subject to change and may not be confirmed until closer to the teaching start date.
Year Location Teaching period Teaching start date Delivery mode Unit convener
2026 Bruce, Canberra Semester 1 16 February 2026 Placement Mr Ryan Elwell
2026 Bruce, Canberra Semester 2 10 August 2026 Placement Mr Ryan Elwell
2027 Bruce, Canberra Semester 1 15 February 2027 Placement Mr Ryan Elwell
2027 Bruce, Canberra Semester 2 09 August 2027 Placement Mrs Joanne Keens
2028 Bruce, Canberra Semester 1 14 February 2028 Placement Mr Ryan Elwell
2028 Bruce, Canberra Semester 2 07 August 2028 Placement Mrs Joanne Keens
The information provided should be used as a guide only. Timetables may not be finalised until week 2 of the teaching period and are subject to change. Search for the unit timetable.

Required texts

None

Submission of assessment items

Extensions & Late submissions

 

Approval of extenuating circumstances will be dependent upon the production of supporting documentation and at the discretion of the unit convener.

All assessment items required to be submitted online must be submitted via the appropriate Canvas drop box. It is the student's responsibility to upload the correct and corresponding draft or assessment item to the right submission section. Assignments must be submitted in a format accessible to the assessor(s), as stated on the relevant canvas site. If the unit convener and/or tutor are unable to access a submission, or if no submission has been made by the due date and time, a standard late penalty of 10% of the total marks possible for the task may be applied per day, for three days, after which the submission will receive a score of ‘0' in keeping with UC's Assessment Policy.

When developing your lesson plans, it is encouraged that you are using your skills in lesson planning and design to create engaging and rich lesson resources. Using materials from commercial sites such as TPT, Twinkl, Sparkle Box etc. is not desirable in this unit, except for Assessment Task 3 - Teacher Reflection and Resources. If you adapt resources from commercial sites and sources, please note this in your lesson planning and resource development.

Suspected instances of unauthorised GenAI use may lead to a Learning Validation Conversation' designed to provide assurance that a student is able to demonstrate relevant knowledge and skills to meet required learning outcomes. Students who are suspected of having misused GenAI in assessment may be required to attend a summary inquiry for suspected misconduct.

 

Special assessment requirements

A minimum aggregate mark of 50% is required to pass the unit as well as the satisfactory attendance of all school based clinics and successful completion of Professional Experience. 

Provision of valid documentation

Please note that the University takes student conduct very seriously. All documentation provided to University staff must be valid and the provision of fraudulent documentation carries with it potentially serious consequences, including suspension and/or exclusion from the University. Note that all allegations of student misconduct will be referred to the Associate Dean for Education (ADE) as a prescribed authority for investigation.

Students must apply academic integrity in their learning and research activities at UC. This includes submitting authentic and original work for assessments and properly acknowledging any sources used.

Academic integrity involves the ethical, honest and responsible use, creation and sharing of information. It is critical to the quality of higher education. Our academic integrity values are honesty, trust, fairness, respect, responsibility and courage.

UC students have to complete the Academic Integrity Module annually to learn about academic integrity and to understand the consequences of academic integrity breaches (or academic misconduct).

UC uses various strategies and systems, including detection software, to identify potential breaches of academic integrity. Suspected breaches may be investigated, and action can be taken when misconduct is found to have occurred.

Information is provided in the Academic Integrity Policy, Academic Integrity Procedure, and University of Canberra (Student Conduct) Rules 2023. For further advice, visit Study Skills.

Learner engagement

You will be working in small groups to plan and deliver lessons during the school based workshops.  This means that you will need to prioritise shared planning time together outside of the workshops (face to face or online) so that you have shared and equitable contribution to this work.

This means that you will attend and participate in a three hour workshop each week and additional hours will be composed of shared planning with your peers, undertaking reading and planning individually and researching for your assignment tasks. In addition 15 days of placement is required.

An approximate breakdown of the workload is:

Workshops and online participation    60 hrs

Weekly lesson planning                      60 hrs

Reading and individual study             120 hrs

Assessment  Preparation                    60 hrs

Total hours                                          300 hrs

Participation requirements

Participation in school based tutorial classes is a compulsory condition of this unit, and attendance will be recorded. You must participate in 100% of the school based tutorial classes to pass this unit. In the event that you cannot attend your assigned session due to illness or extreme circumstances, you must provide appropriate documentation to the Unit Convener as soon as possible. In the case of sessions missed due to illness or extreme circumstances, both the academic content and the professional experience component are required to be made up. More than two documented absences may lead to failure of the unit due to non-completion.

Successful completion of the professional experience placement is critical to success in the whole unit. Refer to assessment (5a) on the Canvas site for further details.Students must familiarise themselves with the processes and policies related to professional experience.

Note: This unit commences with Week 1 and 2 on campus (see timetable for rooms) and weeks 3-7 will be school based to meet accreditation requirements of 3 days professional experience. Weeks 8 & 10 -12 will see a return to on campus workshops. This is subject to change due to school availability and scheduling, so always rely on the Canvas course page for the most up-to-date timetable.

There is a strong correlation between participation and success in higher education. Your participation and engagement with online activities will enhance your understanding of this unit's content and therefore the quality of your assessment responses. Lack of participation may result in your inability to satisfactorily pass assessment items.

Required IT skills

It is expected that students undertaking this unit will have a sound level of information technology competence that includes electronic manipulation of documents, PowerPoints, photographs, videos, slideshows, e-books, websites and apps.  Students need to bring an electronic device (laptop or Smart tablet) to all workshops.

In-unit costs

None.

Work placement, internships or practicums

This unit includes a 15 professional experience placement. Students must adhere to UC policies including the Student Conduct Rules (2018), WIL Policy and Procedure, and Assessment Policy and Procedure. All information regarding placements is available on the All Teacher Education Students (ATES) canvas page and it is the responsibility of the student to check for any updates.  

Students are advised to review InPlace regularly to check the status of their pre-placement requirements and to ensure that all contact details are up-to-date and will be for the during of the placement period. This information must include an emergency point of contact or next of kin. 
 
The Placement Team requires evidence of the following before a placement can be organised: 
 
Pre-placement Requirements (ALL must be uploaded to InPlace): 
  • Working with Vulnerable People (WWVP) card 
  • Working with Children Check (WWCC) 
  • TQI Preservice Teacher Registration 
  • Completion of Pre-Place module 
Early Childhood (EC) – Current First Aid, CPR and Anaphylaxis  
 
Students need to upload this information to InPlace and ensure it is verified (green status) by the due date stipulated by the placement team. All compliance tasks must be valid for the duration of the placement blocks. It is a student responsibility to ensure that previously submitted compliance documentation is valid for subsequent placement blocks. 
 
Pre-placement Requirements (must be uploaded to Unit Canvas Page for first professional experience): 
  • Acceptable Use of ICT form 
  • UC Student Acknowledgement form 
Failure to complete required pre-placement requirements by the due date will result in the cancellation of placement and may result in a fail (NC) grade for the unit. 
 
When students are allocated a placement it is their responsibility to contact the school/service to determine any additional pre-placement requirements specific for that location that need to be completed prior to the placement start date. Failure to do this may result in withdrawal from the placement and potential fail (NC) grade for the unit. 
 
Students who currently have a UC Reasonable Adjustment Plan (RAP) may be eligible for a Placement Support Letter (PSL). It is the student's responsibility to work with UC Wellbeing to determine any adjustment needed for Placement. 
 
Eligibility for placement is dependent on satisfactory academic progression at the time placement is scheduled. 
 
All placements must occur according to the published placement calendar on the ATES site. Students experiencing extenuating circumstances may request a date change; approval, however, is at the discretion of the Faculty. All placement blocks must be completed within 12 months of the associated unit's teaching and learning start date. Delays beyond this timeframe may result in a fail (NC) grade for the unit. 
 
Intervention and Support 
 
Students who demonstrate unsatisfactory progress towards the expected standard of practice at any point throughout their placement will be provided with Intervention and Support. This support process is tailored to meet the needs of the individuals. If sufficient improvements are not evident, a fail grade (NC) for the unit is the likely outcome. If the student's conduct or practice constitutes a significant risk to public safety, a student's placement may be terminated immediately without the Intervention and Support process being enacted. The student will meet with their Unit Convenor/Faculty member and discuss their progress in the unit and provided opportunities to reflect on their practice, setting goals for improvement.  
 
Assessment Requirement 
 
Placement must be successfully passed to pass the Unit 
 
Generalised Support  
 
For placement queries, contact placements@canberra.edu.au. 

Additional information

Provision of information to the group

Notifications through the Canvas Announcements Forum or the Canvas Discussion Forums are deemed to be made to the whole class.  It is the responsibility of the student to ensure that they check for announcements on the Unit's Canvas website (forum messages are also emailed to student email addresses only).  Students should ensure they check their student email regularly.  The Canvas discussion forums will be checked by staff regularly.

Use of student email account

The University Email policy states that "students wishing to contact the University via email regarding administrative or academic matters need to send the email from the University account for identity verification purposes".  Therefore all unit enquiries should be emailed using a student university email account. Students should contact servicedesk@canberra.edu.au if they have any issues accessing their university email account.

Theoretical foundations: This unit covers the theoretical principles of Pedagogical Content Knowledge and the implications for teaching practice. This unit is based on current and emerging professional practices for beginning teachers, as they begin their professional career.

Research Led Education: There are active researchers teaching this unit who are able to engage students in deep and active learning and transmit to students their passion for the research they are carrying out. A focus of the unit is to assist preservice teachers to be classroom ready. Through inquiry-based teaching and project based learning, the learning and assessment modes develop research skills in the preservice teachers.

Next step

Apply now Enquire