Curriculum - Assessment, Planning and Reporting (10425.1)

Required texts

Highly Recommended

Brady, L. & Kennedy, K. (2019). Curriculum Construction. (6th ed.). Pearson.

Wiggins, G. & McTighe, J. (2011). The Understanding by Design guide to creating high-quality units (2nd ed.). Association for Supervision and Curriculum Development (ASCD).

Links and access to additional readings will be made available through the unit Canvas page. 

Submission of assessment items

Extensions & Late submissions

Approval of extenuating circumstances will be dependent upon the production of supporting documentation and at the discretion of the unit convener.

All assessment items required to be submitted online must be submitted via the appropriate Canvas drop box. It is the student's responsibility to upload the correct and corresponding draft or assessment item to the right submission section. Assignments must be submitted in a format accessible to the assessor(s), as stated on the relevant canvas site. If the unit convener and/or tutor are unable to access a submission, or if no submission has been made by the due date and time, a standard late penalty of 10% of the total marks possible for the task may be applied per day, for three days, after which the submission will receive a score of ‘0' in keeping with UC's Assessment Policy.

LESSON PLANS: When developing your lesson plans, it is encouraged that you are using your skills in lesson planning and design to create engaging and rich lesson resources. Using materials from commercial sites such as TPT, Twinkl, Sparkle Box etc. is not desirable in this unit. If you adapt resources from commercial sites and sources, please note this in your lesson planning and resource development.

Artificial Intelligence

Students are permitted to use generative artificial intelligence (GenAI) as indicated in the assessment instructions for this unit. 

GenAI may only be used in authorised ways when completing assessments at UC. This means that GenAI can only be used for an assessment when:

1. the Unit Convener has authorised GenAI use for that assessment
2. the student uses GenAI in the way that the assessment instructions allow
3. the student fully acknowledges their use of GenAI, with proper citations, references and a GenAI Acknowledgement Statement in line with the assessment instructions.

Where the assessment instructions do not specifically state that GenAI may be used and how, then its use is not permitted for that assessment. Students must still provide the required GenAI Acknowledgement Statement to indicate whether GenAI has or has not been used in the preparation of the assessment. If unsure, students should seek advice from the Unit Convener.

It is strongly recommended that students keep records of the development process for all works submitted for assessment, or drafts of work submitted for a work-in-progress review, in a learning portfolio or equivalent. Failure to provide evidence of the development process for assessment may influence a suspicion of GenAI misuse or other forms of academic misconduct. 

 The GenAI for Students Library Guide provides further information, including how to reference GenAI.

Special assessment requirements

An aggregate mark of 50% and Satisfactory completion of a 10-day Professional Experience Placement, as evidenced by a satisfactory final report, are required to pass the unit.

Provision of valid documentation

Please note that the University takes student conduct very seriously. All documentation provided to University staff must be valid and the provision of fraudulent documentation carries with it potentially serious consequences, including suspension and/or exclusion from the University. Note that all allegations of student misconduct will be referred to the Associate Dean for Education (ADE) as a prescribed authority for investigation.

Students must apply academic integrity in their learning and research activities at UC. This includes submitting authentic and original work for assessments and properly acknowledging any sources used.

Academic integrity involves the ethical, honest and responsible use, creation and sharing of information. It is critical to the quality of higher education. Our academic integrity values are honesty, trust, fairness, respect, responsibility and courage.

UC students have to complete the Academic Integrity Module annually to learn about academic integrity and to understand the consequences of academic integrity breaches (or academic misconduct).

UC uses various strategies and systems, including detection software, to identify potential breaches of academic integrity. Suspected breaches may be investigated, and action can be taken when misconduct is found to have occurred.

Information is provided in the Academic Integrity Policy, Academic Integrity Procedure, and University of Canberra (Student Conduct) Rules 2023. For further advice, visit Study Skills.

Learner engagement

An indicative breakdown of workload for the unit is as follows:

Tutorial Activities: 12 hours

Clinic Hours: 8 hours

Weekly readings and Pre-tutorial Activities: 30 hours

Assessment preparation: 100 hours

Professional Experience Placement: 10 days

Participation requirements

Successful completion of the professional experience component is crital to success in the whole unit. Refer to assessment (5a) on the Canvas site for further details. Students must make themselves familiar with the processes and policies of professional experience.

Participation in ‘school based' tutorial classes is a compulsory condition of this unit, and attendance will be recorded. You must participate in 100% of the ‘school based' tutorial classes to pass this unit. In the event that you cannot attend your assigned session due to illness or extreme circumstances, you must provide appropriate documentation to the Unit Convener as soon as possible. In the case of sessions missed due to illness or extreme circumstances, both the academic content and the professional experience component are required to be made up. More than two documented absences may lead to failure of the unit due to non-completion.

Successful engagement with all learning activities in this accredited Initial Teacher Education course is necessary to demonstrate that you have met the Graduate career stage of the Australian Professional Standards for Teachers (AITSL, 2011).

There is a strong correlation between participation and success in higher education. Your participation and engagement with online activities will enhance your understanding of this unit's content and therefore the quality of your assessment responses. Lack of participation may result in your inability to satisfactorily pass assessment items.

Required IT skills

IT skills in the use of the Google Suite; Google Classrooms, Web-based educational applications and Canvas are required.

Work placement, internships or practicums

This unit includes a 10 day professional experience placement. Students must adhere to UC policies including the Student Conduct Rules (2018), WIL Policy and Procedure, and Assessment Policy and Procedure. All information regarding placements is available on the All Teacher Education Students (ATES) canvas page and it is the responsibility of the student to check for any updates.  

Students are advised to review InPlace regularly to check the status of their pre-placement requirements and to ensure that all contact details are up-to-date and will be for the during of the placement period. This information must include an emergency point of contact or next of kin. 

The Placement Team requires evidence of the following before a placement can be organised: 

Pre-placement Requirements (ALL must be uploaded to InPlace): 

• Working with Vulnerable People (WWVP) card 

• Working with Children Check (WWCC) 

• TQI Preservice Teacher Registration 

• Completion of Pre-Place module 

Early Childhood (EC) – Current First Aid, CPR and Anaphylaxis  
 

The student needs to upload this information to InPlace and ensure it is verified (green status) by the due date stipulated by the placement team. All compliance tasks must be valid for the duration of the placement blocks. It is a student responsibility to ensure that previously submitted compliance documentation is valid for subsequent placement blocks. 

Pre-placement Requirements (must be uploaded to Unit Canvas Page for first professional experience): 

• Acceptable Use of ICT form 

• UC Student Acknowledgement form 

Failure to complete required pre-placement requirements by the due date will result in the cancellation of placement and may result in a fail (NC) grade for the unit. 

When students are allocated a placement it is their responsibility to contact the school/service to determine any additional pre-placement requirements specific for that location that need to be completed prior to the placement start date. Failure to do this may result in withdrawal from the placement and potential fail (NC) grade for the unit. 

Students who currently have a UC Reasonable Adjustment Plan (RAP) may be eligible for a Placement Support Letter (PSL). It is the student's responsibility to work with UC Wellbeing to determine any adjustment needed for Placement. 

Eligibility for placement is dependent on satisfactory academic progression at the time placement is scheduled. 

All placements must occur according to the published placement calendar on the ATES site. Students experiencing extenuating circumstances may request a date change; approval, however, is at the discretion of the Faculty. All placement blocks must be completed within 12 months of the associated unit's teaching and learning start date. Delays beyond this timeframe may result in a fail (NC) grade for the unit. 
 

Intervention and Support 

Students who demonstrate unsatisfactory progress towards the expected standard of practice at any point throughout their placement will be provided with Intervention and Support. This support process is tailored to meet the needs of the individuals. If sufficient improvements are not evident, a fail grade (NC) for the unit is the likely outcome. If the student's conduct or practice constitutes a significant risk to public safety, a student's placement may be terminated immediately without the Intervention and Support process being enacted. The student will meet with their Unit Convenor/Faculty member and discuss their progress in the unit and provided opportunities to reflect on their practice, setting goals for improvement.  
 

Assessment Requirement 

Placement must be successfully passed to pass the Unit 

Generalised Support  

For placement queries, contact placement@canberra.edu.au. 

Additional information

Use of student email account

The University Email policy states that "students wishing to contact the University via email regarding administrative or academic matters need to send the email from the University account for identity verification purposes".  Therefore all unit enquiries should be emailed using a student university email account. Students should contact servicedesk@canberra.edu.au if they have any issues accessing their university email account.

When contacting the Unit Convener, please ensure that you put the unit code and the reason for your email in the "Subject" line to ensure that your email is able to be answered as soon as possible.

Research Led Education: This unit involves work-integrated learning. There are active researchers delivering this unit who are able to engage students in deep and active learning and transmit to students their passion for the research they are carrying out.

• Semester 1, 2026, Placement, UC - Canberra, Bruce (231586)
• Semester 1, 2025, Placement, UC - Canberra, Bruce (228468)
• Semester 1, 2024, On-campus, UC - Canberra, Bruce (218985)
• Semester 1, 2023, On-campus, UC - Canberra, Bruce (213026)
• Semester 1, 2022, On-campus, UC - Canberra, Bruce (206001)
• Semester 1, 2021, On-campus, UC - Canberra, Bruce (200970)
• Semester 1, 2020, On-campus, UC - Canberra, Bruce (194240)
• Semester 1, 2019, On-campus, UC - Canberra, Bruce (191569)