Introduction to Computer Engineering G (10096.2)

Please note these are the 2021 details for this unit
Home
/
Find your course
/
Introduction to Computer Engineering G
Available teaching periods Delivery mode Location
View teaching periods On-Campus
 Bruce, Canberra
EFTSL Credit points Faculty
0.125 3 Faculty Of Science And Technology
Discipline Study level HECS Bands
Academic Program Area - Technology Graduate Level Band 2 2021 (Commenced After 1 Jan 2021)
Band 3 2021 (Commenced Before 1 Jan 2021)
This unit introduces the fields of digital electronics and robotics within the broad context of the engineering profession. It provides an introduction to digital electronics by addressing the areas of discrete mathematics, number systems and codes, and combinational logic circuits. Consideration is also given to flip-flops and related devices, counters and registers, and MSI logic circuits.
An overview of robotics is introduced in the second half of the unit by having an overall understanding of the basic structure of a microcontroller. In addition, examples of some controlling platforms including their basic programming are analysed. The interfacing process via microcontroller is presented by looking at drivers and servos.
A final analysis aims to provide a clear understanding of how combining all the pieces together within a digital system project leads to the completion of a servo-controlled system.
This unit is co-taught with Introduction to Computer Engineering, 8223.

Learning outcomes

On successful completion of this unit, students will be able to:
1. Have an appreciation of the nature of the engineering profession by being able to understand, confidently manipulate and utilise discrete mathematical entities;
2. Deal with different systems of numbers and codes and formulate relevant relationships between them;
3. Describe, analyse, and synthesise simple and more detailed logic circuits;
4. Develop an operational understanding of the elements of good design practices by analysing and designing combinational and sequential logic circuits;
5. Verify and appraise circuit operation by using CAD tools and hands-on laboratories; and
6. Integrate the different pieces of knowledge acquired in this unit to synthesise a robotic application through the successful completion of a digital system project.


Graduate attributes

1. UC graduates are professional - use creativity, critical thinking, analysis and research skills to solve theoretical and real-world problems
2. UC graduates are global citizens - make creative use of technology in their learning and professional lives
3. UC graduates are lifelong learners - adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas


Prerequisites

None.

Corequisites

None.

Incompatible units

8223 Introduction to Computer Engineering.

Equivalent units

None.

Assumed knowledge

None.
Year Location Teaching period Teaching start date Delivery mode Unit convener
2024 Bruce, Canberra Semester 2 29 July 2024 On-Campus Dr Julio Romero
Not available

Required texts

Core book:

Digital Systems: Principles and Applications
Tocci, R.J.
Widmer, N.S.
Moss, G.L.
ISBN:9781292025506
Pearson custom library
https://books.google.com.au/books?id=Ac4tnwEACAAJ
2013
Pearson Education

Recommended readings:

Robotics, Vision and Control: Fundamental Algorithms In MATLAB® Second, Completely Revised, Extended And Updated Edition
Corke, P.
ISBN:9783319544137
Springer Tracts in Advanced Robotics
https://books.google.com.au/books?id=d4EkDwAAQBAJ
2017
Springer International Publishing


Practical Electronics for Inventors, Fourth Edition
Scherz, P.
Monk, S.
ISBN:9781259587559
https://books.google.com.au/books?id=lhSCCwAAQBAJ
2016
McGraw Hill LLC

Programming and Customizing the PIC Microcontroller
Predko, M.
ISBN:9780071510875
McGraw Hill professional
https://books.google.com.au/books?id=thRVBipbjLwC
2007
McGraw Hill LLC

Artificial Intelligence: A Modern Approach
Russell, S.
ISBN: 9781292153964
Pearson International.
2021

Discrete Mathematics with Applications
Epp, S.S.
ISBN:9780357035283
https://books.google.com.au/books?id=_341EAAAQBAJ
2018
Cengage Learning

Available for purchase in the University's Co-op bookshop. A limited number of copies of this book are also available from the library.

Submission of assessment items

Special assessment requirements

The ICE unit uses both formative and summative forms of assessment. Students are required to satisfactorily complete a number of assignments and assessable items. Specifications for the assignments and requirements for satisfactory completion are given on the ICE unit website on Canvas (LearnOnline).

Assignment submissions will be assessed for addressing the specific requirements of each assignment, as stated in the assignment descriptions, as well as for employing good programming principles. All assessment items will receive a numerical mark, which together in their entirety define a student's final grade and mark as outlined in section 5a.

Responsibility for understanding

If there is any doubt with regard to the requirements of any particular assignments or assessment procedure, the onus for clarifying the issue rests with the student who should
contact the unit Convener or tutor. Further, it is the responsibility of students to ensure that they are correctly enrolled in the unit and that the tutor and Student Administration have their correct contact details.

Final Grade and Mark

To obtain a particular grade in this unit it is necessary that there are no outstanding resubmissions at the end of Week 13. All assessment items will receive a numerical mark. The final grade will be determined as a weighted average of the individual assessment items as follows:

Final grade = (Assignment 1 mark + Assignment 2 mark +Assignment 3 mark + Mid-Term Online Test) x 0.25 

(note that the marks for each assessment are scaled to 100 before performing this calculation)

To be awarded a particular grade in ICE, students must meet all the requirements listed below. That is, all grades are conditional upon the following minimum requirements:

  • achieve a minimum 50% overall, and
  • achieve at least 50% in each Assignment (1, 2, and 3).

Finally, the following criteria also apply:

Grade

Assignments + Exam

Pass

Minimum 50% of combined weighted marks of all assessment items

Credit

Minimum 65% combined weighted marks of all assessment items

Distinction

Minimum 75% combined weighted score of all assessment item

High Distinction

Minimum 85% combined weighted score of all assessment item

The unit convenor reserves the right to question students on any of their submitted work for moderation and academic integrity purposes, which may result in an adjustment to the marks awarded for a specific task.

Academic integrity

Students have a responsibility to uphold University standards on ethical scholarship. Good scholarship involves building on the work of others and use of others' work must be acknowledged with proper attribution made. Cheating, plagiarism, and falsification of data are dishonest practices that contravene academic values. Refer to the University's Student Charter for more information.

To enhance understanding of academic integrity, all students are expected to complete the Academic Integrity Module (AIM) at least once during their course of study. You can access this module within UCLearn (Canvas) through the 'Academic Integrity and Avoiding Plagiarism' link in the Study Help site.

Use of Text-Matching Software

The University of Canberra uses text-matching software to help students and staff reduce plagiarism and improve understanding of academic integrity. The software matches submitted text in student assignments against material from various sources: the internet, published books and journals, and previously submitted student texts.

Learner engagement

Suggested average student workload:

            Lectures (2h lecture + 0.5h preparation)                 12h x 2h + 6h      =  30h

            Laboratories (2h lab + 3h preparation)                    10h x 2h + 30h     =  50h  

            Laboratory Assignments (Part 1 + Part 2 )               10h + 10h            =  20h

            Digital Systems Project (preparation + report)                                      =  40h

            Mid semester test (incl. preparation)                                                 =  10h

                   

            Total:                                             150 Hours

Participation requirements

Student participation in lectures, tutorials, laboratories, and online activities will enhance the student's understanding of the unit content and therefore the quality of assessment responses. Lack of participation may result in the student's inability to satisfactorily pass assessment items.

Required IT skills

Students should make themselves familiar with PC usage. In particular, it is expected that students are able to manipulate files (copying, pasting,create and manipulate ZIP files) and install / run software in Linux, Mac, or Windows (XP, 7, 8) operating systems. Basic familiarity in a programming language (e.g. C++, Java, Python) will be useful but not compulsory.

This unit involves online meetings in real time using the Virtual Room in your UCLearn teaching site. The Virtual Room allows you to communicate in real time with your lecturer and other students. To participate verbally, rather than just typing, you will need a microphone. For best audio quality we recommend a microphone and speaker headset. For more information and to test your computer, go to the Virtual Room in your UCLearn site and 'Join Course Room'. This will trigger a tutorial to help familiarise you with the functionality of the virtual room.

Work placement, internships or practicums

None