Find the scholarship that's the right fit for you
Bachelor of Primary Education (STeM) (322JA.2)
Selection rank | Delivery mode | Location | Duration |
---|---|---|---|
60 | On campus |
Bruce, Canberra |
4.0 years |
Faculty | Discipline(s) | Available teaching periods | UAC code |
Faculty of Education | Academic Program Area - Education |
364024 | |
Fees | English language requirements | ||
|
View requirements |
English language requirements
There are non-standard English language requirements for this course. To be eligible you must have an overall IELTS Academic score (or equivalent) of 7.5, a score of not less than 8.0 in both speaking and listening, and no band score below 7.0. For alternate/equivalent ways of meeting the English requirements for this course please view the English Proficiency Requirements document on the university website.
Delivery mode
Blended: Mixture of online and on campus units are available.
On campus: Units are delivered on campus.
Online: All units are online.
Online Plus: Units are available online, except where attendance at a physical location is required for placement or professional accreditation.
Location
All course material is developed and delivered via the location listed. Online units do not require on campus attendance.
Selection rank
The selection rank is the minimum ATAR plus adjustment factors required for admission to the program in the previous year. This is an indicative guide only as ranks change each year depending on demand.
Fees disclaimer
Annual fee rates
The fees shown are the annual fee rates for the course. The annual rate is the fee that applies to standard full-time enrolment, which is 24 credit points. The final fee charged is based on the proportion of 24 credit points in which a student enrols. Students enrolled in a Commonwealth Support Place (CSP) are required to make a contribution towards the cost of their education, which is set by the Commonwealth Government. Information on Commonwealth Supported Places, HECS-HELP and how fees are calculated can be found here.
Please note: Course fees are assessed annually and are subject to change.
Academic entry requirements | Delivery mode | Location | Duration |
---|---|---|---|
On campus |
Bruce, Canberra |
4.0 years | |
Faculty | Discipline(s) | Available teaching periods | CRICOS code |
Faculty of Education | Academic Program Area - Education |
088691G | |
Fees | English language requirements | ||
|
View requirements |
Fees disclaimer
Annual fee rates
The fees shown are the annual fee rates for the course. The annual rate is the fee that applies to standard full-time enrolment, which is 24 credit points. The final fee charged is based on the proportion of 24 credit points in which a student enrols. Information on how fees are calculated can be found here.
Please note: Course fees are assessed annually and are subject to change.
Delivery mode
Blended: Mixture of online and on campus units are available.
On campus: Units are delivered on campus.
Online: All units are online.
Online Plus: Units are available online, except where attendance at a physical location is required for placement or professional accreditation.
English language requirements
There are non-standard English language requirements for this course. To be eligible you must have an overall IELTS Academic score (or equivalent) of 7.5, a score of not less than 8.0 in both speaking and listening, and no band score below 7.0. For alternate/equivalent ways of meeting the English requirements for this course please view the English Proficiency Requirements document on the university website.
Location
All course material is developed and delivered via the location listed. Online units do not require on campus attendance.
Academic entry requirements
To study at UC, you’ll need to meet our academic entry requirements and any admission requirements specific to your course. Please read your course admission requirements below. To find out whether you meet UC’s academic entry requirements, visit our academic entry requirements page.
Get an educational advantage by specialising in STeM
This exciting four-year degree allows you to gain a qualification as a primary school teacher with a specialisation in the innovative fields of science, mathematics and technologies. You’ll develop a comprehensive knowledge of the educational theories and teaching skills required in today’s primary school classrooms, as well as a solid understanding of the national primary school literacy and numeracy curriculum from Kindergarten to Year 6.
On top of becoming a confident teacher of English, humanities and social sciences, and health and physical education for children aged five to 12, you’ll develop a focused comprehension of the in-demand subjects of science, technologies and maths. From year two of your studies, you’ll take a range of Pedagogical Content Knowledge (PCK) units which are taught on-site in primary schools, culminating in a specific Science Education Internship in your final year. On completion of the course, you’ll be ready to take your passion for STeM and use it to create an imaginative and creative classroom from your first year of teaching onwards.
Study a Bachelor of Primary Education (STeM) at UC and you will:
- gain appropriate scientific, literacy and numeracy knowledge
- learn the theories and principles that are the foundation for educational practice in primary settings
- demonstrate an understanding of student needs and differences, and the relevance of these to learning in inclusive, indigenous, English as an Additional Language or Dialect (EALD) and mainstream settings
- plan and develop appropriate teaching activities for students from a diverse range of backgrounds
- develop and implement effective assessment strategies and carry out evaluation of teaching programs, resources and your own teaching
- apply the required content knowledge for all primary school curriculum areas to teaching, assessment and reporting methods, alternate/enhanced literacy and numeracy strategies, and the effective use of Information and Communication Technologies (ICT) in teaching and learning
- reflect on your practice and experiences, and engage in a process of continual improvement.
Work Integrated Learning
A teaching degree, by its very nature, is the embodiment of Work Integrated Learning (WIL), with its focus on compulsory professional teaching practice. During this course, you’ll undertake a minimum of 80 days of practical placement across a range of different primary school levels and settings, including STeM-specific positions, culminating in a 30-day Science Education Internship in your final year.
In addition to this, the course content is developed by primary education professionals, and kept relevant and up-to-date through consistent monitoring of, and engagement with, the industry. You’ll undertake authentic assessment tasks which are highly relevant to the day-to-day practice of teaching, and will take part in regular professional development activities, field trips to educational STeM sites such as Questacon, lectures hosted by guest speakers from a range of education and teaching backgrounds, and more.
Career opportunities
- Primary school teacher
- STeM teacher
- Principal
- Deputy principal
- Executive teacher
- Special needs teacher
- Gifted and talented teacher
- Relief teacher
- Private tutor
- Schools policy adviser
- Children’s services manager
- OSHC coordinator (Out of School Hours Care)
- Schools engagement coordinator
Course-specific information
This course is registered by the ACT Teacher Quality Institute (TQI) and recognised as a teaching qualification throughout Australia.
On graduating, students must register with the appropriate state teaching body in order to teach.
Students must obtain a Working with Vulnerable People Check before their first placement.
Professional accreditation
This course is registered by the ACT Teacher Quality Institute (TQI) and recognised as a teaching qualification throughout Australia.
Admission to this course is based on an entrance rank. A rank can be achieved by the following means:
- Year 12 ATAR
- other Australian Qualification
- work experience
- overseas qualification
We also offer a number of entry initiatives that give you the opportunity to gain entry to the University via alternate pathway programs and admissions schemes.
More information is available on our Alternative Entry page: http://www.canberra.edu.au/future-students/applications/apply-now/alternative-entry
Additional admission requirements
All applicants will be required to complete a written statement in response to questions designed to assess their suitability for the teaching profession. Applicants' responses to these questions must be deemed satisfactory for them to be admitted to this course. You can find the questions in the 'resources' section of the online application portal when you are applying. You can upload your responses in PDF format as part of your application.
https://www.canberra.edu.au/about-uc/faculties/education/docs/UG-Teacher-Education-questionnaire.pdf
Students must obtain a Working with Vulnerable People Check.
Assumed knowledge
None.
Periods course is open for new admissions
This course is not open for new admissions.
Credit arrangements
There are currently no formal credit transfer arrangements for entry to this course. Any previous study or work experience will only be considered as part of the application process in accordance with current course rules and university policy.
Bachelor of Primary Education (STeM) (322JA) | 96 credit points
- From 2020 unit 9895 has been replaced by unit 10451.
- From 2020 unit 9895 has been replaced by unit 10451.
- The 21 credit point Major is for students enrolled in 323JA Bachelor of Primary Education (Creative Arts). All other students should complete the 24 credit point Major.
- From 2019 the unit code for Implementing the Australian Curriculum has changed from 9877 to 10426. Students who have passed 9877 do not need to undertake the new unit.
- From 2021 unit 9878 has been replaced by unit 10450. Students who have passed 9878 do not need to pass 10450.
In addition to course requirements, in order to successfully complete your course you must meet the inherent requirements. Please refer to the inherent requirements statement applicable to your course
UC - Canberra, Bruce
Year 1
Year 2
Semester 1
Engaging with LANTITE (10453) - 0 cp, Level 1 can be completed in Semester 1 or 2
Semester 2
Engaging with LANTITE (10453) - 0 cp, Level 1 can be completed in Semester 1 or 2
Year 3
Semester 1
Year 1
Year 2
Semester 1
Year 3
Semester 1
Restricted Education Elective Units
Year 4
Semester 1
Course duration
Standard eight semesters full-time or equivalent. Maximum twenty semesters.
Learning outcomes
Learning outcomes | Related graduate attributes |
---|---|
Knowledge: Demonstrate that they possess the appropriate scientific, literacy and numeracy knowledge to properly inform their teaching, communication and administrative responsibilities; Demonstrate knowledge of theories and principles that are the foundation for educational issues and practice in primary settings with a strong emphasis of STEM subjects; Demonstrate knowledge of the theoretical frameworks that underpin a comprehensive understanding of primary school learners; Demonstrate knowledge and understanding of student needs and differences and the relevance of these to learning in inclusive, indigenous, EALD and mainstream settings within primary schools with special emphasis on STEM subjects. |
1.1 employ up to date and relevant knowledge and skills; 1.2 communicate effectively; 1.3 use creativity, critical thinking, analysis and research skills to solve theoretical and real world problems; 1.6 take pride in their professional and personal integrity. |
Reflect effectively on their practice and on their experiences within their profession and use that reflection to engage in a process of continual improvement. | 2.1 think globally about issues in their profession; 2.2 adopt an informed and balanced approach across professional and international boundaries; 2.6 behave ethically and sustainably in their professional and personal lives. 3.1 reflect on their own practice, updating and adapting their knowledge and skills for continual professional and academic development; 3.2 be self aware; 3.3 adapt to complexity, ambiguity and change by being flexible and keen to engage with new ideas; |
Skills: Plan and develop appropriate teaching activities for students from a diverse range of backgrounds; Develop and implement effective assessment strategies and carry out evaluation of teaching programs, resources and their own teaching. |
1.1 employ up to date and relevant knowledge and skills; 1.2 communicate effectively; 1.4 work collaboratively as part of a team, negotiate, and resolve conflict; 1.5 display initiative and drive, and use their organisation skills to plan and manage their workload; 3.1 reflect on their own practice, updating and adapting their knowledge and skills for continual professional and academic development; 3.2 be self aware; |
Application of Skills and Knowledge: Apply the requisite content knowledge for all Curriculum areas to teaching, assessment and reporting methods, alternate/enhanced literacy and numeracy strategies and the effective use of ICT in teaching and learning; |
2.2 adopt an informed and balanced approach across professional and international boundaries; 2.3 understand issues in their profession from the perspective of other cultures; 2.4 communicate effectively in diverse cultural and social settings; 2.5 make creative use of technology in their learning and professional lives; |
Placements requirements
All students enrolled in programs of initial teacher education are required to complete the statutory checks for working in the school environment that exist in any state or territory where they undertake school based activity. Please note that all students commencing or continuing an initial teacher education course are required to successfully complete both components of the Literacy and Numeracy Test for Initial Education Students (LANTITE) during their degree. More information about the LANTITE can be found at: https://teacheredtest.acer.edu.au/ All students enrolled in an initial teacher education course are also required to successfully complete all components of a Teacher Performance Assessment (TPA) tool integrated into final-level school-based placements and associated units of study.
Majors
- Major in Pedagogy and Practice (MJ0278)
- Major in Science, Technology and Mathematics Education (MJ0280)
- Major in Educational Studies (MJ0275)
Awards
Award | Official abbreviation |
---|---|
Bachelor of Primary Education (STeM) | B Prim Ed (STeM) |
Honours
None.
Alternative exits
EDS001 Undergraduate Certificate in Education
205JA Bachelor of Educational Studies
Enquiries
Student category | Contact details |
---|---|
Prospective Domestic Students | Email study@canberra.edu.au or Phone 1800 UNI CAN (1800 864 226) |
Current and Commencing Students | Please contact the University Student Centre by Email estem-courseadvice@canberra.edu.au or Phone 1300 301 727 |
Prospective International Students | Email international@canberra.edu.au or Phone +61 2 6201 5342 |