Find the scholarship that's the right fit for you
Bachelor of Engineering in Network and Software Engineering (106JA.5)
Please note these are the 2016 details for this course
| Selection rank | Delivery mode | Location | Duration |
|---|---|---|---|
| 4.0 years | |||
| Faculty | Discipline(s) | Available teaching periods | UAC code |
| Faculty of Science and Technology | Academic Program Area - Technology |
||
| Fees | English language requirements | AQF level | |
|
|
View requirements | 7 | |
English language requirements
Academic IELTS of 6.0 or equivalent, with no band score below 5.5
Delivery mode
Blended: Mixture of online and on campus units are available.
On campus: Units are delivered on campus.
Online: All units are online.
Online Plus: Units are available online, except where attendance at a physical location is required for placement or professional accreditation.
Location
All course material is developed and delivered via the location listed. Online units do not require on campus attendance.
Selection rank
The selection rank is the minimum ATAR plus adjustment factors required for admission to the program in the previous year. This is an indicative guide only as ranks change each year depending on demand.
Fees disclaimer
Annual fee rates
The fees shown are the annual fee rates for the course. The annual rate is the fee that applies to standard full-time enrolment, which is 24 credit points. The final fee charged is based on the proportion of 24 credit points in which a student enrols.
Please note: Course fees are assessed annually and are subject to change.
Commonwealth Support Place (CSP)
Students enrolled in a Commonwealth Support Place (CSP) are required to make a contribution towards the cost of their education, which is set by the Commonwealth Government. Information on Commonwealth Supported Places, HECS-HELP and how fees are calculated can be found here.
Research Students
Most domestic Higher Degree by Research students are supported by an Australian Government Research Training Program (RTP) Fee Offset Scholarship and are not liable for fees up the standard course duration. Find out more about your eligibility here.
AQF Level
University of Canberra qualifications are recognised under the Australian Qualifications Framework (AQF).
- Level 5 - Diploma
- Level 6 - Associate Degree
- Level 7 - Bachelor Degree
- Level 8 - Bachelor Honours Degree OR Graduate Certificate OR Graduate Diploma
- Level 9 - Masters Degree
- Level 10 - Doctoral Degree
| Academic entry requirements | Delivery mode | Location | Duration |
|---|---|---|---|
| 4.0 years | |||
| Faculty | Discipline(s) | Available teaching periods | CRICOS code |
| Faculty of Science and Technology | Academic Program Area - Technology |
066903D | |
| Fees | English language requirements | AQF level | |
|
|
View requirements | 7 | |
Fees disclaimer
Annual fee rates
The fees shown are the annual fee rates for the course. The annual rate is the fee that applies to standard full-time enrolment, which is 24 credit points. The final fee charged is based on the proportion of 24 credit points in which a student enrols. Information on how fees are calculated can be found here.
Please note: Course fees are assessed annually and are subject to change.
Delivery mode
Blended: Mixture of online and on campus units are available.
On campus: Units are delivered on campus.
Online: All units are online.
Online Plus: Units are available online, except where attendance at a physical location is required for placement or professional accreditation.
English language requirements
Academic IELTS of 6.0 or equivalent, with no band score below 5.5
Location
All course material is developed and delivered via the location listed. Online units do not require on campus attendance.
Academic entry requirements
To study at UC, you’ll need to meet our academic entry requirements and any admission requirements specific to your course. Please read your course admission requirements below. To find out whether you meet UC’s academic entry requirements, visit our academic entry requirements page.
AQF level
University of Canberra qualifications are recognised under the Australian Qualifications Framework (AQF).
- Level 5 - Diploma
- Level 6 - Associate Degree
- Level 7 - Bachelor Degree
- Level 8 - Bachelor Honours Degree OR Graduate Certificate OR Graduate Diploma
- Level 9 - Masters Degree
- Level 10 - Doctoral Degree
Charge your IT future and keep the world connected
Do you want a degree in network and software engineering that offers plenty of choice in your career? Do you want to become an accredited professional engineer?
With our Bachelor of Engineering in Network and Software Engineering you will be in demand internationally across the rapidly growing IT and telecommunications industries.
Study our Bachelor of Engineering in Network and Software Engineering at UC and you will:
- study core areas of network and software engineering
- acquire in-depth knowledge and skills for a range of software based systems in communication network infrastructures
- cover data networking, mobile and wireless communications, network security, cloud computing, big data and multimedia
- be able to design, implement and operate communication networks, as well as associated services and applications.
Work Integrated Learning
Every student completes an exciting industry-oriented engineering project during their degree. You will also have the opportunity to undertake professional internships for valuable workplace experience.
Career Opportunities
- Communications
- Audio-visual
- Recreational
- Automobile telematics
- Industrial control
- Home automation
Course specific information
It is assumed that applicants have completed the following subjects as part of their high school studies:
- ACT: Mathematical Methods
- NSW: Mathematics.
Professional accreditation
This course is fully accredited by Engineers Australia at Professional Engineer level and also by the Australian Computer Society at Professional level.
Applicants must meet normal University requirements for admission to an undergraduate course or hold qualifications deemed to be equivalent by the University¿s Admissions Committee.
Assumed knowledge
Specialist Maths (Recommended) (T) or Mathematical Methods (T) and English (T)
Periods course is open for new admissions
This course is not open for new admissions.
Credit arrangements
There are currently no formal credit transfer arrangements for entry to this course. Any previous study or work experience will only be considered as part of the application process in accordance with current course rules and university policy.
Bachelor of Engineering in Network and Software Engineering (106JA) | 96 credit points
Note:
- From 2019 the unit code for 8741 Introduction to Network Engineering has changed to 11485 and for 9428 Network Architecture to 11484.
Introduction to DSP (8226) | 3 credit points — Level 1
- A minimum of 12 weeks of professional work experience, normally undertaken at the end of the third year of full-time study (or part-time equivalent), is required by Engineers Australia.
- The unit Engineering Work Experience is for the purposes of recording & assessment of work experience, & has no credit points. Students should enrol into the unit when conducting the work experience.
Database Systems (7157) | 3 credit points — Level 3
Distributed Systems Technology (7159) | 3 credit points — Level 3
Object Oriented Software Design (7165) | 3 credit points — Level 3
System Testing (7172) | 3 credit points — Level 3
Pattern Recognition (8240) | 3 credit points — Level 4
Optical Communications (8242) | 3 credit points — Level 4
Advanced Wireless Communication (8244) | 3 credit points — Level 4
- Honours: Students undertaking Honours must complete unit 9826 ICT and Engineering Research Methods.
- Unit Availability: The availability of Part A units may vary each semester.
Engineering Project 1 (9587) | 6 credit points — Level 4
Engineering Project 2 (9588) | 6 credit points — Level 4
Note:
- Option 1 is for students who are not undertaking Honours.
Engineering Thesis 1 (6cp) (9824) | 6 credit points — Level 4
Engineering Thesis 2 (6cp) (9825) | 6 credit points — Level 4
Note:
- Option 2 is for Honours students.
In addition to course requirements, in order to successfully complete your course you must meet the inherent requirements. Please refer to the inherent requirements statement applicable to your course
UC - Canberra, Bruce
Year 1
Year 2
Semester 1
Semester 2
Restricted Choice Part A Unit
Year 3
Semester 1
Introduction to DSP (8226)
Restricted Choice Part A Unit
Year 4
Semester 1
Two Restricted Choice Part A Units
Engineering Project 1 (9587)
Semester 2
Two Restricted Choice Part A Units
Engineering Project 2 (9588)
Year 1
Year 2
Semester 1
Semester 2
Restricted Choice Part A Unit
Year 3
Semester 1
Introduction to DSP (8226)
Restricted Choice Part A Unit
Year 4
Semester 1
Restricted Choice Part A Unit
Engineering Thesis 1 (6cp) (9824)
Semester 2
Engineering Thesis 2 (6cp) (9825)
Two Restricted Choice Part A Units
Course duration
Standard eight semesters full-time or equivalent. Maximum twenty four semesters.
Learning outcomes
| Learning outcomes | Related graduate attributes |
|---|---|
| Develop a functional specification from an initial brief, evaluate the various design options available to meet a given set of technical requirements, formulate a final design specification, and demonstrate how to implement and test the preferred option; | Analysis and inquiry: ability to gather information, analyse and evaluate information and situations in a systematic, creative and insightful way. |
| Demonstrate an understanding of the professional engineering environment including appropriate team working skills, leadership, professional communication, and engineering workplace ethics, responsibilities and sustainability; | Professionalism and social responsibility: capacity and intention to use professional knowledge and skills ethically and responsibly, for the benefit of others and the environment. |
| Apply systematic approaches to the conduct and management of engineering projects; | Working independently and with others: ability to plan own work, be self¿directed, and use interpersonal skills and attitudes to work collaboratively. |
| Apply relevant theories and techniques of data communication networks and software engineering to the analysis and solution of technological problems in the merging software and telecommunication industry, such as those encountered in the Commonwealth Public Service, major telecommunications companies and national and international software and networking industry companies; | Application of Knowledge and skills: ability to apply relevant theories, techniques and engineering strengths to the analysis, design, construction and maintenance of systems in network communications and software engineering. |
| Communicate effectively in oral and written form to professional and wider audiences; | Communication: ability to present knowledge, ideas and opinions effectively and communicate within and across professional and cultural boundaries. |
| Demonstrate the ability to transfer and enhance the knowledge and skills acquired during the course to new or complementary areas of engineering and technology through the establishment of continuing professional development plans and career goal planning, key for lifelong learning; | Application of Knowledge and skills: Lifelong learning and personal attributes applicable to the evolving technological world. |
| Participate in the processes of business analysis of systems, and appreciate entrepreneurial approaches in engineering practice; | Skills: professional skills for the development of the engineering activity within a broad business context. |
| Demonstrate knowledge of the underpinning mathematics, computer and information fundaments applicable to the engineering discipline; | Knowledge: comprehensive, theory based understanding of the underpinning sciences and engineering fundamentals. |
| Demonstrate detailed understanding of telecommunications and software engineering principles to architect, develop and operate communication networks and the associated services and applications assuring the appropriate security and quality mechanisms; | Knowledge: knowledge and underlying principles and concepts in the engineering discipline, which are the basis for independent lifelong learning. |
| Design, implement and maintain software and network communication systems, following contemporary engineering practices; | Skills: technical skills for the design, implementation and maintenance of software and network communication systems. |
| Determine which engineering principles are appropriate to use in the solution of complex technological problems in the field of information engineering; | Problem solving: ability to apply problem¿solving processes in novel situations; identify, analyse problems then formulate, implement solutions. |
Majors
Awards
| Award | Official abbreviation |
|---|---|
| Bachelor of Engineering in Network and Software Engineering | BE Network&SE |
Honours
Honours degree programs are available to students who achieve good results [Grade Point Average (GPA) of 5.00/7 or better) in the third year of their studies. Honours students then complete additional work (an extension to the project) in their fourth year of study to qualify to graduate with the degree with Honours. The degree with Honours will be awarded in the following classes depending on the Grade Point Average obtained and other conditions as follows:
¿ First Class ¿ GPA>6 in fourth-year subjects, High Distinction for the Engineering project, outstanding work in the Honours extension;
¿ Second Class Division 1 ¿ GPA>5.5 in fourth-year subjects, Distinction for the project, excellent work in the extension; and
¿ Third Class ¿ Not awarded. Student takes out the pass degree.
Enquiries
| Student category | Contact details |
|---|---|
| Prospective International Students | Email international@canberra.edu.au or Phone +61 2 6201 5342 |
| Current and Commencing Students | Please contact the University Student Centre by Email student.centre@canberra.edu.au or Phone 1300 301 727 |
| Prospective Domestic Students | Email study@canberra.edu.au or Phone 1800 UNI CAN (1800 864 226) |
It seems something went wrong with your submission. Please email study@canberra.edu.au to receive your 2023 course guide.
stayonpage
Thanks for submitting your details. A course guide will be sent your email address shortly.
